Table of Contents
Advertisement
4
Check the programmed tracks
(and replace, add or delete tracks as
required).
To check:
To replace a track in the program:
1 Select the programmed disc
or track to be replaced and
press the SELECT key.
2 Select a disc or track to re-
SELECT
place the disc or track selected
above (step 3-1and 2).
To add a track to the program:
1 Select the display as shown
on the right and press the
SELECT key.
2 Perform the same operations
SELECT
as in step 3-1and 2.
To delete a track from the program:
1 Select the programmed disc
or track to be cleared and
press the SELECT key.
2 Select "clear" and press the
SELECT
SELECT key.
5
Enter it.
(Playback starts from the first programmed
track (program No. 1))
Turn the MULTI CONTROL jog dial during program
playback to stop to the previous or next programmed
track.
When the jog dial is rotated a little in the
counterclockwise direction once during playback, the
track being played will be played from the beginning.
To check (modify, add or delete) the programmed
tracks after playback, perform the operations in steps
2 and 4.
ENTER
Press the TIME key on the remote control unit to switch
the time display.
P
0 1
D 1
The programmed tracks are displayed in sequence.
P
1 2
D 3
P
0 1
D 3
The blinking item can be replaced.
Display when 12 tracks have been programmed
P
1 3
D ?
The added track number is added to the end of the
existing program.
P
1 2
D 3
P 1 2
c l e a r
To quit the program mode
1
Select "CD Program Play".
MENU
2
Press the MENU key.
MENU
If the key is pressed during playback, normal playback in
order of tracks resumes from the current track.
The program mode can also be canceled by pressing
the OPEN/CLOSE (0) key.
Playback of CD
T 0
2
T 0
4
T 0
4
T ?
?
T 0
4
SELECT
Goes off
33
Hide quick links:
Advertisement
Table of Contents
