Kenwood XD-A83 Instruction Manual page 23

To wind tape at high speed
To fast wind in
direction |
Press the 7 key to stop fast winding.
Selection of reverse mode
Each press switches the modes as follows.
1
" " .... Playback stops after having played
both sides of tape in a deck.
(Relay play :
2
" " ... Endless playback of both sides of
tape.
3
" " ...... Playback stops after having played
one side of tape.
Normal (TYPE ) or high (TYPE ) tape selection is set
automatically.
Remove tape slack before loading.
Close the door securely.
Lights up when a tape is present in the deck in use.
T.EQ
A B
Displays the selected deck.
If the tape transport direction is opposite to the desired
direction, press the play key corresponding to this.
To fast wind in
direction \
REVERSE
MODE
¢
)
Reverse mode indication.
Selection of Tape Equalizer
Select Tape Equalizer only when playing back a tape
recorded with Dolby Noise Reduction. (A tape recorded
without Dolby NR cannot be reproduced in normal au-
dio if Tape Equalizer is selected when playing it.)
TAPE EQ.
Each press switches the modes as follows.
1
"T.EQ" ON ...... Tape Equalizer is used
2
"T. EQ" OFF ....... Tape Equalizer is not used
The Tape Equalizer is effective for reduction of
higher-frequency noise.
To stop playback
Do not take out the cassette tape until the tape
transport has stopped completely.
Transport direction indicators
The indicators (2 3) indicate the current direction in
which the tape advances when playback or record-
ing is started automatically by the one-touch opera-
tion function, etc. This direction is the direction stored
in memory when the tape was last stopped.
(To switch the tape transport direction, press the play
key corresponding to the desired direction then press
the stop (7) key.)
Tape direction indicators of currently selected deck.
T.EQ
A B
Let's have sound
Lights up when
Tape Equalizer is on.
23