Specifications - Kenwood HM-V655MP Instruction Manual

Specifications

Main unit
[Amplifier section]
Rated output power during STEREO operation
(1 kHz, 10% T.H.D., at 6
Frequency response
AUX ............................ 30 Hz~100 kHz (0 dB ~ -3dB)
[Tuner section]
FM tuner section
Tuning frequency range ......... 87.5 MHz ~ 108 MHz
AM tuner section
(For Australia)
Tuning frequency range .......... 531 kHz ~ 1,602 kHz
(For other countries)
Tuning frequency range
9 kHz step ............................ 531 kHz ~ 1,602 kHz
10 kHz step .......................... 530 kHz ~ 1,610 kHz
[CD player section]
Laser ............................................. Semiconductor laser
D/A Conversion ..................................................... 16 Bit
Over sampling ....................................... 8 fs (352.8 kHz)
Laser wave length .................................... 760 - 800 nm
Laser power class ................................... Class 3A (IEC)
Digital output (Optical) .............. – 15 dBm ~ – 21 dBm
Video Output format .................................... NTSC/PAL
Video Output level .................................... 1 Vp-p (75 )
[Cassette deck section]
Track ..................................... 4-track, 2-channel stereo
Recording system ................................ AC bias system
Heads
Playback/ recording head ....................................... 1
Erasing head ............................................................. 1
Wow and flutter ................................ 0.2 % (W.R.M.S.)
Fast winding time ....................... Approx. 100 seconds
56 EN
) ................. 50 W + 50 W
(Wave length 660 nm)
(Frequency: 105 kHz)
(C-60 tape)
[General]
Power consumption ............................................ 120 W
Dimensions ............................... W : 180 mm (7-1/16")
Weight (net) ........................................... 5.4 kg (11.9 lb)
Speakers
Enclosure ..... Bass-reflex type, magnetically shielded
Speaker configuration
Woofer ...................................... 120 mm, cone type
Tweeter ..................... 25 mm, balanced dome type
Impedance ................................................................ 6
Maximum input level ............................................ 50 W
Dimensions ............................... W : 150 mm (5-7/8")
Weight (net) ............................... 2.5 kg (5.5 lb) (1 piece)
KENWOOD follows a policy of continuous ad-
vancements in development. For this reason
specifications may be changed without notice.
÷ Sufficient performance may not be exhibited
at extremely cold locations (where water
freezes).
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model
In case of difficulty
H : 255 mm (8-7/16")
D : 335 mm (13-3/16")
H : 255 mm (10-1/16")
D : 213 mm (8-3/8")
Serial Number