Playback Of Video Cd; Playing Back A Video Cd Using The Menu - Kenwood HM-V655MP Instruction Manual

Playback of VIDEO CD

Playing back a VIDEO CD using the menu

With a disc incorporating PBC, a menu is displayed on the TV screen so that you can select the desired
tracks to be played with simple interactive operations.
Before operating, set the NTSC/PAL switch of this unit according to the TV format (country or region) and
disc. %
Key error display
If a wrong key is pressed when operating the
unit, a hand mark is displayed at the top left cor-
ner of the TV monitor screen.
Select the CD input.
Press in stop mode
1
Confirm that the "PGM" indicator is not lit.
PGM
2
Select "PBC ON".
AUTO PBC
3
Press the CD 6 key.
4
Select items on the menu display.
To select menu items (scenes):
1
4
7
10
To change the display:
P.CALL
38 EN
2 3
5 6
8 9
0
P.CALL
When PBC is ON and a VIDEO CD (with PBC) is
played, the playback control functions, includ-
ing the menu display, operate automatically.
A conventional music CD or VIDEO CD without
PBC can be played normally even when the
"PBC" indicator is lit.
÷ If the "PGM" indicator is lit, press the PGM key to turn it
off.
Confirm that this is not lit.
Each press switches the modes as follows.
PBC ON
PBC OFF
The menu display, the operation method, and
the operation key depend the disc being
played. For details, refer to the instructions
enclosed with your disc.
Press the numeric key as shown below....
To select track No. 5 : 5
To select track No. 17 : +10 x 1, 7
÷ When several menus (scenes) can be selected in each
level, pressing the PREV. or NEXT key switches the
display.
÷ To operate a menu with a hierarchical structure, see
"When the menu has a hierarchical structure".
÷ A VIDEO CD requires a little time for screen switching,
etc. after key operation.
Playback of VIDEO CD
Lights
·