Kenwood DVR-8100 Instruction Manual page 60

60
DVD / CD player unit
Symptom
The viewing angle cannot be
changed.
A disc can not be played although the
region code is displayed as [ALL].
Playback will not start even after a
title is selected.
The viewing restriction level (RAT-
ING) cannot be changed.
The voice or subtitle language se-
lected in the initial setting is not
played.
No message appears on the TV screen
after a key is pressed.
Menu screen messages are not
shown in the desired language.
Inhibition icon
Symptom
The inhibition icon is dis-
played and remote control
is not possible.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts
to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the
connection to the "STANDARD DEFINITION" output. If there are questions regarding our TV set compatibility with this model
525p DVD player, please contact our customer service center.
Cause
÷ The DVD disc being played does not con-
tain the recording of more than one angle.
÷ You are attempting to switch the angle in a
DVD section where more than one angle is
not recorded.
÷ Some discs can not be played in all regions
even when [ALL] is displayed.
÷ A viewing restriction (Parental level) has
been set for the disc.
÷ You have forgotten the viewing restriction
(Parental) password.
÷ The DVD disc being played does not con-
tain the recording of the selected voice or
subtitle language.
÷ The function for displaying message on the
TV screen is set to off.
÷ The menu language function (MENU) is not
set.
Cause
÷ Playback is restricted intentionally by the
software producer.
In case of difficulty
Remedy
÷ The viewing angle cannot be changed when
the DVD disc being played does not contain
the recording of more than one angle.
÷ More than one viewing angle may be re-
corded only in limited sections in a disc.
÷ Play a different disc.
÷ Check the viewing restriction level (Paren-
tal level) setting.
÷ Set the initial setup to the factory setup
with the following procedure.
With no disc in the unit, press the 6 key.
After "NO DISC" is displayed, press the
DVD/CD key, cursor 3 key, 2 key, ∞ key,
5 key on the remote and 4 key on the
main unit in this order.
Press the POWER switch to OFF and press
the POWER switch again to ON.
÷ Use a DVD disc containing the recording of
the selected voice or subtitle language.
÷ Set On-screen function to on.
÷ Set the disc menu language function
(MENU) as required.
Remedy
÷ The operation is inhibited. Please try an-
other operation.
DVR-8100 (EN)
¤
u
y
ª
u
0