Table of Contents
Advertisement
Control of a different device with the accessory remote controller
54
Register the setup codes for your audio and video
The devices which can be set up are TV, VCR, SAT (satellite tuner), and CABLE.
1 Press and hold the SOURCE ( ) key.
You must hold down the SOURCE
( ) key until you reach step 4.
2 Use the numeric keys to enter the
setup code.
3 Press the device key to assign the
setup code.
4 Release the SOURCE ( ) key.
5 Press the SOURCE ( ) key, CH +/–
keys, etc. to test the code.
Operating other devices
1 Press one of the device keys
for operation.
DVD/CD
TUNER
BAND
VCR
CABLE
SOURCE
1
2
3
4
5
6
7
8
9
PGM
CLEAR
+100
0
+10
DVD/CD
TUNER
SAT
BAND
VCR
CABLE
TV
2 Press SOURCE
the device on.
SAT
TV
÷ SAT and CABLE both switch this unit to the SAT/CABLE
input.
÷ If you input a setup code that cannot be assigned to the
selected device key, the key's original setting is re-
tained.
3 Press device operation key.
key to turn
(Keys which can be used to
operate connected devices
SOURCE
DVR-8100 (EN)
Y)
Advertisement
Table of Contents
