Storing Scenes In Memory (Memory Function); Storing A Scene In Memory; Recalling/Clearing A Scene In Memory - Kenwood DVF-9010 Instruction Manual

Storing scenes in memory (Memory function)

By storing scenes that you want to check later, subsequent playback can be started from any of the stored scenes any time.
Up to 5 scenes can be stored (using the remote control unit only).
This operation may not be available with certain DVD discs.
Software with which this function is avail-
able:

Storing a scene in memory

1
Press the MEMORY key during playback.
RC
DVD
CD
DVD
SET UP
2
Press the ENTER key at the scene you want to store in memory.
RC
To store other scenes in memory, repeat following steps
1 and 2 for each.
1 Select a scene with the joystick (@, #).
2 Press the ENTER key.

Recalling/clearing a scene in memory

1
Press the MEMORY key during playback.
RC
2
Select the memory number to be recalled or canceled.
RC
To recall and play
1 Select a scene with the joystick (@, #).
2 Press the % key.
To clear
Press the C key.
DVD CD VCD
1
MEMORY
8
1 ¡
ENTER
1
MEMORY
8
1 ¡
ENTER
C
÷ "
" is displayed in positions where no scene is stored in memory.
÷ The scene corresponding to the selected memory number is searched
and playback starts from it.
÷ The scene in the selected memory number is cleared.
DVF-9010 (En/E)
1
1 2 3 4
1 2 3 4
1 2 3 4
1 3 4
29