Manual Clock Adjustment; Auxiliary Input Display Setting; Demonstration Mode Setting - Kenwood KDC-MP4039 Instruction Manual

7
Do the step 3 through 6 step operation, and
reenter the security code.
"APPROVED" is displayed.
The Security Code function activates.
⁄
• If you enter a Code different from your Security Code,
you have to start over from step 3.
8
Exit Security Code mode
Press the [M.JOG] button.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1
Turn the power ON.
2
Do the step 3 through 6 step operation, and
reenter the security code.
"APPROVED" is displayed.
⁄
• If an incorrect code is entered, "WAITING" is displayed,
and the input prohibition periods shown in the table
below is generated.
After the input prohibition time lapses, "CODE" is
displayed, and you can reenter the code.
Number of times the
incorrect code was input
1
2
3
4

Manual Clock Adjustment

1
Select Clock Adjustment item during Menu
mode
Select the "CLOCK ADJUST" display.
For how to select menu items, refer to <Menu
System>(page 10).
2
Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjust the time
Push the control knob towards up or down to
adjust the hours and right or left to adjust the
minutes.
4
Exit Clock adjustment mode
Press the [M.JOG] button.
Input prohibited time
—
5 minutes
1 hour
24 hours

Auxiliary Input Display Setting

Selects the display below when changing to
Auxiliary input source;
• "AUX"
• "DVD"
• "PORTABLE"
• "GAME"
• "VIDEO"
• "TV"
1
Select Auxiliary input display setting item
during Menu mode
Select the "NAME SET" display.
For how to select menu items, refer to <Menu
System>(page 10).
2
Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
3
Select the Auxiliary input display
Push the Control knob towards right or left.
4
Exit Auxiliary input display setting mode
Press the [M.JOG] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, "AUX EXT" is
displayed by default.

Demonstration mode Setting

Turning the demonstration mode ON/OFF.
1
Select Demonstration item during Menu mode
Select the "DEMO MODE" display.
For how to select menu items, refer to <Menu
System>(page 10).
2
Set the Demonstration mode
Press the Control knob for at least 2 second.
Pressing this button for 2 seconds or longer toggles
the setting between "ON" and "OFF".
3
Exit Demonstration mode
Press the [M.JOG] button.
11
|
English