Adjusting The Monitor Display Position And Quality; Displaying The Screen Control Screen; Displaying The Tilt Adjust Screen - Kenwood DDX8027 Instruction Manual

Adjusting the Monitor Display Position and Quality

You can adjust the position and picture quality of the monitor.

Displaying the Screen Control screen

You can adjust the picture quality using the
following keys.
Screen Control screen
Screen Control
1
BRT
2
TIN
3
COL
4
CONT
5
BLACK
Dimmer Mode

Displaying the Tilt Adjust screen

You can set the monitor tilt.
Tilt
Angle Control screen
Tilt Control
9
9
1 2 3
10
Full Close
50
|
English
6
1
Tilt
2
3
4
5
8
7
OK
SYNC
Screen
9 9
9
4 5 6
OK
1 Brightness Control
2 Tint Control
Displayed for an NTSC system image on TV or
Video.
3 Color Control
Displayed on the TV and Video screen only.
4 Contrast Control
5 Black Level Adjustment
6 Displays the Adjust Monitor Position screen.
(see <Displaying the Angle Control screen>, page
50)
7 Dimmer Mode Setup
"SYNC":
"Manual":
8 Returns to the previous screen.
• The Screen Control screen is displayed only when you have
applied the parking brake.
• The picture quality can be set for each source.
9 Monitor Tilt Adjustment
p The monitor fully closes.
q Returns to the Screen Control screen.
w Returns to the previous screen.
• If you turn the power off, the panel will close. However, if
you turn the power back on, it will return to the adjusted tilt.
11
9
12
Turning the Dimmer function
On or Off when the vehicle light
control switch is turned On or Off.
Turning the Dimmer function On
or Off when [SCRN] key is pressed
more than 1 second.