Tv/ Video Control; Displaying The Tv Picture Screen; Displaying The Easy Control Panel - Kenwood DDX8027 Instruction Manual

TV/ Video Control

Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional
accessory TV Tuner connected.).

Displaying the TV Picture screen

Various control screens appear in the TV Source
mode.
Select the TV
Pictures.
TV Picture screen
TV 1 Group 1
TV
1
AUTO1
2
Mode: FULL AVOUT:
6 7
8

Displaying the Easy Control Panel

The Control Panel is displayed in a floating position
of the TV picture.
Displaying the Easy Control Panel
10 11
9
VIDEO TV
SRC
TV1
TV
AUTO1
36
|
English
Preset 3 2 ch
3
4
TV
5
12 12 13
SEEK
2 ch
1 TV Band Number Display
2 TV Area Group Display (page 74)
3 Memory Number Display
4 Channel Number Display
5 Channel Up Area
Increase the channel.
6 Channel Down Area
Decrease the channel.
7 Band/Video Switch Area
Switches to TV1, TV2, VIDEO1 or VIDEO2.
8 Information Display Button Area
• For TV picture selection and receiver key operations, see
<DDX8027 Basic Operations> (page 8).
• The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated (page 66).
9 Switches the source.
p Switches to Video (VIDEO1 or VIDEO2).
q Switches the TV band (to TV1 or TV2).
w Calls up a channel.
e Switches the Seek mode.
(see page 39 for the <Seek Mode>)
• The Easy Control Panel display is hidden when you touch a
central area of the monitor.