NEC NP-UM330X User Manual page 117

• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER IN
HDMI 1 IN
HDMI 2 IN
USB (PC)
* The HDMI button on the remote control will toggle between "HDMI1 and HDMI2". Upon the first button push the
projector will always switch to HDMI 1 IN. A second button push will then switch to HDMI 2 IN. if there is only one
HDMI source connected to the projector it is recommended to place that signal on the HDMI 1 IN connector.
NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan
converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.
SOURCE button on the projector
cabinet
COMPUTER
HDMI1
HDMI2
USB DISPLAY
6. Installation and Connections
Button on the remote control
(COMPUTER 1)
(USB DISPLAY)
107
(HDMI*)
(HDMI*)