Antenna Connection - Bush A626 Instruction Manual

ANTENNA CONNECTION

WARNING:
- Switch off the TV before
connecting any external device.
CONNECTING THE ANTENNA
1. Connect the Antenna Plug to the Antenna
T
Input located at the rear of the TV.
See fig. 10.
2. For optimum picture quality, adjust antenna
direction if needed.
3. To improve the picture quality in a poor
signal area, you may use a signal amplifier
(not included).
AC POWER CORD CONNECTION
NOTE: Make sure your local Voltage is
230V/240V~, 50Hz.
1. Connect the AC Power Cord a to the
mains socket.
See fig. 10
p.10
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
a
fig. 10
T
Antenna Plug
BU