Bush A626 Instruction Manual page 9

KNOW YOUR MACHINE
F Vol -: Press to decrease the Volume. In Menu mode, press to decrease a set-
ting.
G CH +: Press to go to the next higher channel. In Menu mode, functions as the
up arrow.
H CH -: Press to go to the next lower channel. In Menu mode, functions as the
down arrow.
I
Power Button: Use this button to switch your LCD TV on/off.
J
Common Interface Slot: Function when PC Card or ExpressCard is in COM-
MON INTERFACE slot of the set. Please refer to your plug-in card manual for
detail information.
/ AV input: connect the VIDEO recorders or DVD players with standard com-
K L
posite output and audio output signal.
S-video Input: Connect the video for a S-Video device to this jack, and com-
M
patible with composite/audio input.
USB Input: This TV set can support Multi media input for .MP3 and .JPEG file.
N
Headphone Output: Connect to headphones (32Ω).
O
HDMI Input: High Definition Multimedia Interface. Connect to devices with
P
digital signals and can be used with PC or HDTV video signals.
VGA Input: Connect to VGA analog signals sources.
Q
Component Input: The YPbPr video signal can be used if connecting through
R
the component video port. For example Progressive Scan DVD players, Hi-
scale HDTV Decoders, and satellite receivers, obtain video with maximum
resolution using YPbPr and L/R audio signals.
S SPDIF: SPDIF is highly recommended for high quality digital sound output.
Antenna Input: Connects to TV RF signals (antenna/CATV).
T
U SCART: The left one is Full SCART with transmits RGB,S-Video and CVBS in
and CVBS tuner out,the right one is half SCART which transmits S-Video or
CVBS in and CVBS monitor out.
V Power Connector: Connect the power cord into the AC IN socket found at the
back of the TV.
PC Audio Input: PC audio supports 3.5mm Jack.
W
X
HDMI Input: High Definition Multimedia Interface. Connect to devices with
digital signals and can be used with PC or HDTV video signals.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105
p.07