Table of Contents
Advertisement
ANTENNA CONNECTION
WARNING:
-
Switch off the TV before
connecting any external device.
CONNECTING THE ANTENNA
1. Connect the Antenna Plug to the
Antenna Input Q located at the
rear of the TV.
See fig. 9.
2. For optimum picture quality, adjust
the direction of the antenna.
3. To improve picture quality where
the signal is poor use a signal
amplifier (not included).
AC POWER CORD CONNECTION
NOTE: Make sure your local
voltage is 230V/240V~, 50Hz.
1. Connect the AC Power Cord Z
to the Power Connector X .
See fig. 9.
2. Connect the AC Power Cord Z
to the mains socket.
See fig. 9.
10
BUSH
HD Ready Digital LCDTV
X
Mains Socket
Z
User Manual
Customer Helpline 0845 604 0105
TUNING MENU OPTIONS
TURN ON THE LCD-TV
1. When the POWER J or
pressed the TV will turn on and the
Power LED A on the front of the
fig. 9
TV will change from red to blue
See fig. 10 and 11.
2. When the LCD-TV is turned off
using the POWER J or
LCD-TV will go into standby mode
and the Power LED A will turn
red.
See fig. 10 and 11.
Q
FIRST TIME INSTALLATION
1. This display will appear on the
screen when the TV is turned on
for the first time.
See fig. 12.
NOTE: If you can not find this
screen press MENU
use the Natvigation Keys
select the TV menu.
See fig. 11.
2. Press the Green Button
proceed with the installation.
See fig. 11.
Antenna Plug
BUSH
HD Ready Digital LCDTV
A
is
A
, the
A
fig. 11
U
a
U
. Then
Y
to
a
to
Thank you for your purchase of this TV.
Please proceed with the following steps to set-up your TV.
User Manual
Customer Helpline 0845 604 0105
J
fig. 10
A
Y
fig. 12
Next
11
Hide quick links:
Advertisement
Table of Contents
