Dell PowerEdge M420 Configuration Manual page 1221

Command
ipv6 pimsm hello-interval
seconds
ipv6 pimsm bsr-border
ipv6 pimsm dr-priority
priority
ipv6 pimsm join-prune-
interval
interval
exit
exit
show ipv6 pimsm
show ipv6 pimsm interface
vlan-id
vlan
show ipv6 pimsm neighbor
vlan-id
[interface vlan
show ipv6 pimsm rphash
groupaddr
show ipv6 pimsim bsr
show ipv6 pimsm rp
mapping
Purpose
Specify the number of seconds (range: 0–65535) to
wait between sending PIM hello messages on the
interface.
Prevent bootstrap router (BSR) messages from being
sent or received through the interface.
Set the priority value for which a router is elected as
the designated router (DR). The election priority
range is 0–2147483647.
Configure the interface join/prune interval for the
PIM-SM router. The interval range is 0–18000
seconds.
Exit to Global Config mode.
Exit to Privileged EXEC mode.
View system-wide PIM-DM information.
View the PIM-SM information for the specified
interface.
View a summary or all the details of the multicast
| all] table.
View the RP router being selected for the specified
multicast group address from the set of active RP
routers. The RP router for the group is selected by
using a hash algorithm.
View the bootstrap router (BSR) information.
View group-to-RP mappings of which the router is
aware (either configured or learned from the BSR)
Managing IPv4 and IPv6 Multicast
1221