Interface Queue Configuration - Dell PowerEdge M420 Configuration Manual

Interface Queue Configuration

Use the Interface Queue Configuration page to configure egress queues on
interfaces. The settings you configure control the amount of bandwidth the
queue uses, the scheduling method, and the queue management method.
The configuration process is simplified by allowing each CoS queue
parameter to be configured globally or per-port. A global configuration
change is applied to the same queue ID on all ports in the system.
To display the Interface Queue Configuration page, click Quality of Service
→ Class of Service → Interface Queue Configuration in the navigation
panel.
Figure 40-4. Interface Queue Configuration
1134
Configuring Class-of-Service