Configuration ID = 11h, Power Management
Attribute
ID
Power
1
Management
Enable
Power Staggering
2
AC Recovery
Power On Delay
3
Minimum Power
4
On Delay
Maximum Power
5
On Delay
IPMI OEM Command List
|
Size
Description
1
Specify the use of power
management method.
Bit 7: Enable DPNM power
management
1b = enable DPNM
0b = disable DPNM
Bit 6:0: reserved
1
This parameter is only
effective if the Power Policy is
not set to always off.
0x00 : Immediate Power On
(No Delay) : Default
0x01 : Auto (Random), the
auto generated delay time must
be in the range of Minimum
Power On Delay and
Maximum Power On Delay.
0x02 : User Defined, the user
defined delay time must be in
the range of Minimum Power
On Delay and Maximum
Power On Delay.
2
Defines the time to delay
power on the system after AC
recovered.
2
Specifies the minimum power
on delay time when AC is
restored. This should not be
less than the time BMC startup
time.
2
Specifies the maximum power
on delay time when AC is
restored. The number must
large than Minimum Power
On Delay.
70
R/W
R/W
R/W
R
R/W