Presets - B&K Reference 20 Plus Owner's Manual

Set DVD audio input - Allows you to select which ONE input source to dedicate for use with the DVD Audio
inputs. This setting is not necessary if there is no need for a DVD audio or other 5.1 input source When you select
Yes for a particular input, any previously selected DVD Audio input will be automatically reset to No. When you
select Yes for a particular input, the favorite Mode is automatically set to DVD audio mode. Setting a source to
DVD audio mode does not prevent you from using the digital inputs from that source. Simply select one of the
other four listening modes to return to digital processing for the designated DVD audio input.
From Remote
­ V
17
(PAUSE) or (STOP)
X W
18
(REW) or (FF)
19 repeat 1 - 16
20 MENU

Presets

Usually these settings may be left set to the factory defaults. However, your processor allows 'fine tuning' of how
presets operate. Make sure you are in the SETUP MENUS and your remote is in B&K mode.
MAIN MENU
1 Zone 1 Operation
2 Zone 2 Operation
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
5 System Setup
5 System Setup
6 Memory Backup/Restore
next item
MENU
6<67(0 6(783
From Remote
­ V
1
(PAUSE) or (STOP)
2 SEL or ENTER
SETUP DVD
1 Favorite Mode
2 Favorite Speakers
3 Level
4 Name
5 Component Video
6 DVD Audio Input
6 DVD Audio Input
next item
MENU setup system
'9' '9'$ 12
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
repeat 1 - 16
Ø
MENU
SEL select
exit menu system
From Front Panel
(UP) or (DOWN)
(ENTER)
INPUT
Surround
7
0.0 dB
DVD
2
No
No
adjust
Action
move to DVD Audio Input
select Yes or No for use with source
continue for each input source
return to SETUP SYSTEM
SETUP SYSTEM
1 Speakers
2 Displays
3 Inputs
4 Presets 4 Presets
next item
MENU main menu
6(783 35(6(76
Action
move to Presets
activate SETUP PRESETS
43
SEL select
13258 11/01