B&K Reference 20 Plus Owner's Manual page 41

From Remote
­ V
1
(PAUSE) or (STOP)
X W
2
(REW) or (FF)
Set the Zone 1 (A) Monitor Aspect Ratio - During normal operation, your processor will overlay status
information on your video monitor. This information is normally displayed at the bottom of the monitor. However,
if you are viewing letterbox material on a 16:9 (widescreen) monitor, this information will be cut off. Selecting the
16:9 monitor aspect ratio will position the status display within the letterbox viewing area. This setting does NOT
affect setup menus. Your monitor must be set for normal 4:3 viewing in order to display the entire menu page.
From Remote
­ V
1
(PAUSE) or (STOP)
X W
2
(REW) or (FF)
3 MENU
SETUP DISPLAYS
1 Front Panel Bright
2 Overlay Opaque Bright
3 Backround Color Blue
4 Z1 Monitor Video Manual
4 Z1 Monitor Video Manual
5 Z1 Monitor Aspect 4 : 3
next item adjust
MENU setup system
9,'(2 0$18$/
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
SETUP DISPLAYS
1 Front Panel Bright
2 Overlay Opaque Bright
3 Backround Color Blue
4 Z1 Monitor Video Manual
5 Z1 Monitor Aspect 5 Z1 Monitor Aspect 4 : 3 4 : 3
next item adjust
MENU setup system
$63(&7  
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
Ø
MENU
38
Action
move to Zone 1 (A) Video Monitor
adjust for desired operation
Action
move to Zone 1 (A) Monitor Aspect
change aspect ratio
return to SETUP SYSTEM
13258 11/01