Message Window Displays - AT&T E2555 User Manual

91-5621-40-00_E2555 CIB2_R2.qxd
12
Message window
(Flashes when new
messages are waiting).
6/5/2006 5:52 PM
Answering System Operation

Message window displays

The message window usually displays the total number of
memos and incoming messages. See the list below for
explanations of other displays in this window.
Message window displays
0 No messages waiting.
1-8 Current volume level while adjusting volume.
1-98 Number of messages/memos, or message
currently playing (see page 29).
10-99 Current Remote Access Code while setting
(see page 28).
1-99 (counting) Elapsed time while recording a memo (see page 31)
or announcement up to 90 seconds (page 26).
99 (flashing) Memo recording exceeded maximum time of 99
seconds.
F (flashing) Memory is full. Messages must be deleted before
new messages can be received.
CL (flashing)
Clock needs to be set (see page 25).
A Announce Only mode is on (see page 27).
-- System is answering a call, or being accessed
remotely.
-- (flashing) System is being programmed or initialized.
On (or) OF Displayed for 1 second when any answering
system setting is turned on or off.
32
Page 32