Removing The Microsd Card; Powering On/Off Your Phone - Zte Adamant User Manual

1. Remove the battery cover, as previously instructed.
2. Position the microSD card with the metal contacts
facing down and slide it into place until it is fully
inserted and locked in place.
3. Replace the battery cover, as previously instructed.

Removing the microSD Card

1. Remove the battery cover, as previously instructed.
2. Gently pull the exposed border of the microSD card to
release it. Then gently pull it out to remove it.

Powering On/Off Your Phone

It's important to fully charge the battery before turning
on your phone.
• To power on the phone, press and hold the
End/Power Key until the LCD screen lights up.
Note: If the phone lock code has been activated, you
need to enter the code to unlock the phone. The default
lock code is the last 4 digits of your phone number.
If the SIM card is inserted in your phone and the SIM
PIN is enabled, you also need to enter the PIN code
when powering on the phone. The default PIN code is
1111. See "SIM Security" on page 117 for more
information.
15