Nikon CoolPix S6300 Reference Manual page 114

The Setup Menu
Option
Format memory/
Format card
Language
TV settings
Charge by computer
Blink warning
Eye-Fi upload
Filmstrip
Reset all
Firmware version
96
Allows you to format the internal memory (only when a
memory card is not inserted) or the memory card (when a
memory card is inserted).
• All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to save important images
by transferring them to a computer before formatting.
Allows you to change the camera's display language.
Set these settings to match your TV. You can select the
video output mode (NTSC or PAL) and adjust HDMI
output settings.
When set to Auto (default setting), you can charge the
camera's battery by connecting the camera to a computer
(provided that the computer is able to supply power).
• When charging by computer, it may take more time to
charge the battery than when using the Charging AC
Adapter EH-69P. Additionally, when charging by
computer and transferring images to the computer, it
takes more time to charge the battery.
Immediately after taking a picture using face detection
(A73) (except when using smart portrait mode), if the
camera detects a subject with closed eyes, the camera
displays the message Did someone blink?, allowing you
to check the image. The default setting is Off.
Set whether or not to enable the function for sending
images to a computer using a commercially available
Eye-Fi card. The default setting is Disable.
When On is selected, thumbnails of previous and
subsequent images are displayed at the bottom of the
monitor when you rotate the multi selector quickly while
viewing an image in full-frame display (A32). The default
setting is Off.
Allows you to reset the camera's settings to their default
values.
• Certain settings such as Time zone and date and
Language are not reset.
View the current camera firmware version.
Description
A
E77
E78
E79
E80
E82
E84
E85
E86
E89