Transcript Of Cell Migration Operation - HP Integrity rx7620 Configuration

The system name of the HP-UX instance running in partition q is "remote_system" and the userid
"administrator" has the required privilege.
parolrad -d S
parmodify -p p -d S
parmodify -p q -a S:floating:y:float:100%
Is necessary to wait until the cell has completed its power on sequence.
parolrad -a S -u administrator: -g remote_system
The parolrad command will prompt for the password associated with the administrator userid. Then,
the cell migration operation will complete.

Transcript of cell migration operation

Following is an actual transcript of a cell migration operation, performed on a system with a
prototype version of the Dynamic nPartitions feature. The objective of this operation is to migrate cell
2 from partition 1 to partition 0.
The first commands are typed to a terminal session on partition 1.
[par1]# parstatus -C
[Cell]
Hardware Actual
Location Usage
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Core
cab0,cell1 Active Core
cab0,cell2 Active Float 8/0/8
cab0,cell3 Active Base
Notes: * = Cell has no interleaved memory.
[par1]# olrad -D -s 2
Chassis Delete operation in progress...
[ NOTE: The chassis delete operation may take a few minutes to complete
on large configurations. It is recommended not to disrupt this operation. ]
CRA REPORT SUMMARY: CRA returned SUCCESS.
Detailed CRA report is available in /var/adm/cra.log file.
Activity : End of Chassis-Delete operation. Ok to go ahead with the
OnLine De-activation of the Cell.
Hardware path : 2
[par1]# parolrad -d 2
Note: Cell Online deactivation operation has been initiated.
The sequence number is: 2
Note: Cell OL* operations, may take several minutes to complete.
Killing or otherwise aborting this parolrad command will not cancel the
Cell OL* operation. See the parolrad (1M) manpage for details.
Online operation in progress ....
Online operation has completed successfully.
[par1]# parmodify -p 1 -d 2
[par1]# parstatus -C
CPU Memory
OK/ (GB)
Deconf/ OK/
Max Deconf Connected To
8/0/8 8.0/0.0 cab0,bay0,chassis0
8/0/8 8.0/0.0 cab0,bay0,chassis1
8.0/0.0 cab8,bay0,chassis0
8/0/8 8.0/0.0 cab8,bay0,chassis1
Use
Core On
Cell Next Par
Capable Boot Num
yes yes 0
yes yes 1
yes yes 1
yes yes 0
15