Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual page 52

3) Firmly holding the document with both hands and bend back the document as fol-
4) Repeat steps 1) to 3) a few times.
5) Turn the document staple 90 degrees, hold the other two sides of the document, and
2. Load the document onto the paper chute cover.
Load the document so that the top side of the two-sided document (in the case of two or
more document sheets, the first page) faces towards the paper chute cover.
Reduce the quantity of the documents, when the thickness of stack exceeds the reference
marks on the side guides.
Reference
mark
ATTENTION
34
lows so that the bent section rises up in the middle of the document.
fan it again.
If the check box for [Allow docu-
ments to be scanned face up
through the ADF] of [Scanning] -
[Options] in the "Scan and Save
Settings" window of ScanSnap
Manager is selected, set the front
of the document with the top edge
face-up.
Paper chute cover
Side guide