Setting The Clock Time; Setting The Minutes For The Sleep Timer - RCA RCU810 - Learning Universal Remote Control User Manual

RCU810_MANUAL.QXD 1/7/02

Setting The Clock Time

The Clock Time will function automatically after you program the time, following the
directions below.
1. Press and hold the CODE SEARCH key until the remote
window displays CODE SET.
2. Step through the programming menu using the
UP ( ) key or DOWN ( ) key for CLOCK SET,
then press the SELECT key.
3. After the SELECT key is entered, the remote will display
the hours and minutes clock time.
4. Use the UP ( ) key to modify the hours and the DOWN ( )
key for setting up the minutes.
NOTE: To set the AM or PM appropriately use the UP ( ) key and
step through the hours for the correct setting.
5. Once the time is setup to the correct time, push the SELECT
key to complete the setup. The display messages SUCCESS
followed by EXIT SETUP will be shown, and return to its
normal operation.

Setting The Minutes For The Sleep Timer

The Sleep Timer Function will turn off your device automatically after you program the time interval.
1. Press and hold the CODE SEARCH key until the remote
window displays CODE SET.
2. Step through the programming menu for
SLEEP SET, then press the SELECT key.
3. The display window will first display 000 as number of
minutes to start the Sleep Timer time setting. You will be
allowed to enter the desired minute's value. Any key other
than Digit Keys (0-9) entered here will result in an INVALID
message display.
NOTE: A valid value of minutes must not be greater than 240 minutes,
otherwise an ERROR message displays followed by MAX=240,
prompting you to re-input the minute values.
4. Once the desired time for SLEEP SET has been selected, push
the SELECT key to complete the Sleep Timer Setting. The
Sleep Timer is now setup and the remote will return to its
normal operation.
IMPORTANT NOTE: Sleep Timer, as setup above, is for setup ONLY,
not to begin the sleep timer action.
5. To start the sleep timer, press the SLEEP key. Once the Sleep
Timer has taken its effect it is important to keep the remote
aimed at the device to be turned off.
• Pressing any other key will exit the Sleep Timer and the remote will
return to its normal operation.
• Pressing the SLEEP key again will reset the Sleep Timer again to its
original preset value.
11:49 AM Page 21
To Change
The Hours
To Change
The Minutes
20