Setting-Up A Macro Key Sequence - RCA RCU810 - Learning Universal Remote Control User Manual

RCU810_MANUAL.QXD 1/7/02

Setting-Up A Macro Key Sequence

MACRO is a command, which defines a sequence of several operations. Each MACRO key has
one command sequence programmed so you can make as many as 15 keystrokes in a sequence.
For Example: When operating one or more devices to power ON/OFF, one macro key enables
you to program series of power ON/OFF commands into one key.
1. Press and hold the CODE SEARCH key until the remote
window displays CODE SET.
2. Step through the programming menu using the
UP ( ) key or DOWN ( ) key for KEY MACRO,
then press the SELECT key.
3. Once the SELECT key is pressed a SEL MACKEY
message will display for you to input a Macro Key
(M1, M2, M3).
NOTE: If the entered key is a invalid Macro Key, a display
message INVALID will be shown and the remote will
stay in Macro programming mode until a valid Macro
Key is entered.
4. The display message ENTER SEQ will be shown.
You can begin entering the series of keystrokes, up
to 15 keys, that you wish to be played back when you
press the designated Macro key. After the very first key
for the macro sequence is entered, the display message
will change to SEL TO END.
NOTE: If more than 15 keys are entered, a message ERROR
followed by MAX=15 will be shown. The remote will
return to SEL MACKEY again for you to setup macro
sequence again.
5. Press and hold down the SELECT key for 3 seconds to
complete the programming sequence. The SELECT key
must be pressed and held down for at least 3
seconds to exit the sequence.
6. The remote will then display the message SUCCESS,
followed by the message EXIT SETUP and return to its
normal operation.
NOTES:
• Press the CLEAR key at any time to exit the programming
mode. An EXIT SETUP message will appear and the remote
will return to its normal operation.
• If about 30 seconds passes before a key is pressed, the LCD
display window will stop transmission to conserve battery life.
If this occurs, restart from step 1.
17
11:49 AM Page 18
Enter the series
of keystrokes.
Hold For 3 Seconds