Installing And Using Options; Cut-Sheet Feeder - Epson LQ-300+II User Manual

Installing and Using Options

Cut-sheet feeder

The optional single-bin cut-sheet feeder (C806372) handles up to
50 sheets of standard bond paper (82 g/m² ) without reloading.
Follow these steps to install the cut-sheet feeder:
1. Make sure the printer is turned off. Remove the paper guide
and open the paper guide cover.
2. If the tractor is installed in the pull-tractor position, remove it
and reinstall it in the push-tractor position.
3. Make sure the paper-release lever is in the single-sheet
position.
2-34
Using the Printer