Install Range - Whirlpool RS675PXGB Installation Instructions Manual

3-Wire Cable from Home Power Supply
IMPORTANT: Use the 3-wire cable from home power supply
where local codes permit a 3-wire connection.
A
B
C
D
E
F
A. Cable from home power supply
B. Junction box
C. Black wires
D. White wires
E. Green (or bare) ground wire
(from range)
1. Connect the 2 black wires (C) together using a UL listed wire
connector.
2. Connect the 2 white wires (D) and the green (or bare) ground
wire (of the range cable) using a UL listed wire connector.
3. Connect the 2 red wires (G) together using a UL listed wire
connector.
4. Install junction box cover.

Install Range

1. Using 2 or more people, lift range partially into cabinet cutout
using the oven opening as an area to grip.
NOTE: Push against seal area of oven front frame when
pushing range into cabinet. Do not push against outside
edges.
G
H
I
F. 4-wire flexible cable from
range
G. Red wires
H. UL listed wire connectors
I. UL listed or CSA approved
conduit connector
2. Push against seal area of front frame to push range into
cabinet until shipping feet almost contact cabinet.
A
A. Shipping foot
3. Use a Phillips screwdriver to remove and discard shipping
feet.
4. Push range completely into cabinet and center range in
cabinet cutout.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Securely attach mounting screws to cabinet.
Reattach mounting screws if the range is moved.
Failure to follow these instructions can result in death
or serious burns to children and adults.
5. Securely fasten range to cabinet using the two #8–14 x 1"
screws provided. Insert the screws through holes in mounting
rails. Do not overtighten screws.
A. Two #8–14 x 1" screws
A
7