Advanced Page - Kyocera FS-2100DN Management Manual

Using a Web Browser to Manage the IB-51
SNTP Server
3-6. General Settings > Reset
To enable the changes you have made to IB-51 network settings, you must restart the network interface. You can also restore the
default settings as needed.
Item
Restart Network Interface
Set all Network Settings to
Factory Default

4. Advanced Page

This page includes advanced settings applicable to all aspects of IB-51 operation. You can restrict access to this page by setting an
administrator password. Refer to
4-1. Protocols > TCP/IP > TCP/IP
This table gives an overview of the items displayed on this page.
file:///C:/Tom/PDF/IB-51/IB-51%20Setup%20Guide%20HTML%20English/card_homepa...
SNTP Server: Obtain the time from a SNTP server. Designate the server name or IP
—
address.
Set the SNTP server name or IP address.
Description
Click the Restart button to restart the network interface.
Click the Reset button to restore the default network interface settings.
3-4. General Settings > Password
Figure 3. IB-51's Web Page Advanced Page
for details.
Page 7 of 22
10/2/2012