To Quit The N In 1 Function; Toner Save; Changing The Default Menu Settings; To Update The Default Copy Mode Setting - Konica Minolta pagepro 1390MF User Manual

To Quit the N in 1 Function

Suppose you selected 2-in-1 and want to quit the N in 1 function after scan-
ning the first of two document pages.
1
Place the original document face down on the flatbed glass and align its
center with the arrow mark on the glass.
2
Press the N in 1 key to select 2-in-1.
3
Press the Start key. The message window displays Next Scan
:START
4
Press the # key on the number keypad to quit the N in 1 function. The
machine prints the first document page.

Toner Save

You can conserve toner using this function. When you turn on Toner Save,
print appears somewhat lighter. The default setting is off.
Each time you press the Toner Save key on the control panel to turn on the
function, the LED labeled "Toner Save" comes on.
If you press the Toner Save key on the control panel again to turn off the
function, the LED labeled "Toner Save" goes off.

Changing the Default Menu Settings

The copy options, including Density, Copy Mode, Zoom and Collate, can be
set to the most frequently used ones. When you copy a document, the default
settings are used, unless they are changed by using the corresponding keys
on the control panel.

To Update the Default Copy Mode Setting

1
Press the Menu key.
2
Press a scroll key until 2.Copy Setup appears on the display.
3
Press the Select key.
4
Press a scroll key until 21.Def Copy Mode appears on the display.
5
Press the Select key.
6
Press a scroll key to select the desired Copy Mode item.
7
Press the Select key to make the selection.
Setting Copy Options
Scan End : #.
55