Brother PT 1400 - P-Touch 1400 Two-color Thermal Transfer Printer User Manual page 52

Error Message
MIN 4 DIGITS!
NO FILES!
NO TAPE!
TEXT TOO HIGH!
XX BLOCK
TEXT TOO LONG!
TEXT TOO LONG!
XX BLOCK
VALUE OUT OF
RANGE!
44
Cause
• This message appears if less
than the minimum four
digits are entered as the bar
code data.
• This message appears if no
files are stored in the
memory when you try to
recall or delete one.
• This message appears if no
tape cassette is installed
when you try to feed the
tape, print or use the
Preview function.
• This message appears if the
size of the text is larger than
the width of the installed
tape.
• This message appears if the
length of the text is longer
than the label length that has
been set with the Length
function.
• This message appears if you
try to print a label that is
longer than the specified
block length.
• This message appears if the
value entered while setting
the Margin, Length, and
Block Length function is not
within the allowable range.
• This message appears if the
values for the blocks to be
printed is not within the
allowable range.
Solution
• Enter a minimum of four
digits before pressing
n
.
• Store a text file before trying
to recall or delete one.
• Install a tape cassette and try
again.
• Reduce the size of the
characters, install a tape with
a greater width, or select the
AUTO text size setting.
A
• Press , and then select a
longer label length.
• Reduce the size or width of
the characters, or select the
AUTO text size setting.
• Select a longer block length.
• Type in a value that is within
the allowable range.