Advertisement
Liftoven intocabinet cutout using t heoven opening a san
area togrip.
NOTE: Push against seal area ofoven front f rame w hen
pushing oven intocabinet. Donotpush against outside
edges.
2,
Push against seal area of front frame to push oven into
cabinet until shipping feet almost contact cabinet.
A. Mounting rail
B. insert screw
On some models, the oven vent is taped to the side of the
oven. See following instructions to install.
a}. Insert the vent tabs (B) into slots (A) in the oven frame.
b}. With one screw (C) for each side of the vent, fasten vent
securely to the oven.
A
B
C
A. Shipping foot
3. On some models, use a Phillips screwdriver to remove screws
attaching shipping feet.
4. Push oven completely into cabinet and center oven into
cabinet cutout.
A. Oven frame slot
B. Vent tab
C. Screw
Slide top end of each trim upward onto oven side rails.
Advertisement
