Table of Contents
Advertisement
Table 23. BIOS Setup Configuration Jumper Settings
Function/Mode
Jumper Setting
Normal
1-2
Configure
2-3
Recovery
None
Configuration
The BIOS uses current configuration information and
passwords for booting.
After the POST runs, Setup runs automatically. The
maintenance menu is displayed.
Note that this Configure mode is the only way to clear the
BIOS/CMOS settings. Press F9 (restore defaults) while in
Configure mode to restore the BIOS/CMOS settings to their
default values.
The BIOS attempts to recover the BIOS configuration. A
recovery CD or flash drive is required.
Technical Reference
53
Advertisement
Table of Contents
