Intel P55 Express Chipset; Usb; Sata Interfaces - Intel BLKDP55WG - P55 LG1156 MAX-16 GB DDR3 ATX Motherboard Technical Product Specification

Desktop board
Table of Contents

Advertisement

Intel Desktop Board DP55WG Technical Product Specification
®
1.6
Intel
The Intel P55 Express Chipset consisting of the Intel P55 Express Platform Controller
Hub (PCH) provides interfaces to the processor and the USB, SATA, LPC, LAN, PCI,
and PCIe interfaces. The PCH is a centralized controller for the board's I/O paths.
For information about
The Intel P55 Express Chipset
Resources used by the chipset
1.6.1

USB

The board supports up to fourteen USB 2.0 ports, supports EHCI, and has two internal
hubs (RMH) that allow the use of EHCI-compatible drivers.
The PCH provides the USB controller for all ports. The port arrangement is as follows:
Eight ports are implemented with stacked back panel connectors
Three internal headers that support six additional ports
For information about
The location of the USB connectors on the back panel
The location of the front panel USB headers
1.6.2

SATA Interfaces

The board provides six internal SATA connectors through the PCH, which support one
device per connector.
The PCH provides independent SATA ports with a theoretical maximum transfer rate of
3 Gb/s per port. One device can be installed on each port for a maximum of six SATA
devices. A point-to-point interface is used for host to device connections, unlike
Parallel ATA (PATA) IDE which supports a master/slave configuration and two devices
per channel.
For compatibility, the underlying SATA functionality is transparent to the operating
system. The SATA controller can operate in both legacy and native modes. In legacy
mode, standard IDE I/O and IRQ resources are assigned (IRQ 14 and 15). In Native
mode, standard PCI Conventional bus resource steering is used. Native mode is the
preferred mode for configurations using the Windows* XP, Windows Vista*, and
Windows 7* operating systems.
NOTE
Many SATA drives use new low-voltage power connectors and require adapters or
power supplies equipped with low-voltage power connectors.
For more information, see: http://www.serialata.org/.
For information about
The location of the SATA connectors
18
P55 Express Chipset
Refer to
http://www.intel.com/products/desktop/chipsets/index.htm
Chapter 2
Refer to
Figure 10, page 40
Figure 11, page 41
Refer to
Figure 11, page 41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp55wg

Table of Contents