1.10 Legacy I/O Controller; Serial Port - Intel BLKDH61CRB3 Technical Product Specification

Product specification
Table of Contents

Advertisement

Intel Desktop Board DH61CR Technical Product Specification

1.10 Legacy I/O Controller

The Legacy I/O Controller provides the following features:
One serial port
One back panel parallel port (with Extended Capabilities Port (ECP) and Enhanced
Parallel Port (EPP) support
PS/2-style keyboard/mouse interface on the back panel
Serial IRQ interface compatible with serialized IRQ support for PCI Conventional
bus systems
Intelligent power management, including a programmable wake-up event interface
Conventional PCI bus power management support
The BIOS Setup program provides configuration options for the Legacy I/O controller.
1.10.1

Serial Port

The serial port is implemented as a 10-pin header on the board. The serial port
supports data transfers at speeds up to 115.2 kbits/s with BIOS support.
For information about
The location of the serial port header
22
Refer to
Figure 10, page 43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dh61cr

Table of Contents