Intel Viiv™ Processor Technology; Usb; Serial Ata Interfaces - Intel BLKDG33FBC Technical Product Specification

Product specification
Table of Contents

Advertisement

1.6.2
Intel
This Intel desktop board supports Intel
the Intel Viiv processor technology brand, a system must meet certain hardware and
software requirements. To get the list of requirements for Intel Viiv processor
technology branding as well as all the features supported by Intel Viiv processor
technology, refer to:
http://www.intel.com/products/viiv/index.htm
1.6.3

USB

The board supports up to 12 USB 2.0 ports, supports UHCI and EHCI, and uses UHCI-
and EHCI-compatible drivers.
The ICH9DH provides the USB controller for all ports. The port arrangement is as
follows:
Six ports are implemented with stacked back panel connectors
Six ports are routed to three separate front panel USB headers
For information about
The location of the USB connectors on the back panel
The location of the front panel USB headers
1.6.4

Serial ATA Interfaces

The board provides four Serial ATA (SATA) connectors, which support one device per
connector.
1.6.4.1
Serial ATA Support
The DG33FB Desktop Board's Serial ATA controller offers four independent Serial ATA
ports with a theoretical maximum transfer rate of 3 Gbits/sec per port. One device
can be installed on each port for a maximum of four Serial ATA devices. A point-to-
point interface is used for host to device connections, unlike Parallel ATA IDE which
supports a master/slave configuration and two devices per channel.
For compatibility, the underlying Serial ATA functionality is transparent to the
operating system. The Serial ATA controller can operate in both legacy and native
modes. In legacy mode, standard IDE I/O and IRQ resources are assigned (IRQ 14
and 15). In Native mode, standard PCI Conventional bus resource steering is used.
Native mode is the preferred mode for configurations using the Windows* XP
operating system.
NOTE
Many Serial ATA drives use new low-voltage power connectors and require adapters or
power supplies equipped with low-voltage power connectors.
For more information, see:
For information about
The location of the Serial ATA connectors
®
Viiv™ Processor Technology
http://www.serialata.org/
®
Viiv™ processor technology. To be eligible for
Product Description
Refer to
Figure 9, page 41
Figure 10, page 42
Refer to
Figure 10, page 42
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Boxdg33fbcDg33fb

Table of Contents