Connectors - Intel BLKD915PBLL - LGA775 800FSB 4DDR2 Audio Lan 1394a SATA Raid ATX 4PCI 10Pack Motherboard Technical Product Specification

2.8 Connectors

CAUTION
Only the following connectors have overcurrent protection: back panel USB, front panel USB,
and PS/2.
The other internal connectors are not overcurrent protected and should connect only to devices
inside the computer's chassis, such as fans and internal peripherals. Do not use these connectors
to power devices external to the computer's chassis. A fault in the load presented by the external
devices could cause damage to the computer, the power cable, and the external devices themselves.
This section describes the board's connectors. The connectors can be divided into these groups:
•
Back panel I/O connectors (see page 58)
•
Component-side I/O connectors (see page 60)
Technical Reference
57