ASROCK 880GM-LE FX User Manual page 42

Processor Voltage
It allows you to adjust the value of processor voltage. However, for safety and
system stability, it is not recommended to adjust the value of this item.
NB Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
HT Bus Speed
This feature allows you selecting Hyper-Transport bus speed. Configuration
options: [Auto], [x1 200MHz] to [x8 1600MHz].
HT Bus Width
This feature allows you selecting Hyper-Transport bus width. Configuraion
options: [Auto], [8 Bit] and [16 Bit].
Memory Configuration
Memory Clock
This item can be set by the code using [Auto]. You can set one of the standard
values as listed: [400MHz DDR3_800], [533MHz DDR3_1066],
[667MHz DDR3_1333] and [800MHz DDR3_1600].
DRAM Voltage
Use this to select DRAM voltage. The default value is [Auto].
Memory Timing
BIOS SETUP UTILITY
OC Tweaker
Memory Timing
[Disabled]
Power Down Enable
[Auto]
Bank Interleaving
Channel Interleaving [Hash 2]
CAS Latency (CL) [Auto]
TRCD [Auto]
TRP [Auto]
TRAS [Auto]
[Auto]
Command Rate
TRC [Auto]
TRTP [Auto]
TWR [Auto]
TRFC [Auto]
[Auto]
TRRD
TWTR [Auto]
[Auto]
TRTP
TFAW [Auto]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Power Down Enable
Use this item to enable or disable DDR power down mode.
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the same
node, or accross nodes, decreasing access contention.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 2 4 2 4 2 4 2 4 2