ASROCK 880GM-LE FX User Manual page 41

Advanced Clock Calibration
This allows you to adjust Advanced Clock Calibration feature. The default value
is [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and [Per
Core]. If you select [All Cores], you will see the option "Value (All Cores)".
Configuration options: [+12%] to [-12%]. If you select [Per Core], you will see
the options "Value (Core 0)", "Value (Core 1)", "Value (Core 2)" and "Value
(Core 3)". Configuration options: [+12%] to [-12%].
AMD Turbo Core Technology
This item appears only when the processor you adopt supports this feature.
Use this to select enable or disable AMD Turbo Core Technology. Confi guration
options: [Auto] and [Disabled]. The default value is [Auto].
AMD IO C-State Support
This allows you to enable or disable AMD IO C-State Support. The default
value is [Enabled].
CPU Active Core Control
This allows you to adjust CPU Active Core Control feature. The configuration
options depend on the CPU core you adopt. The default value is [All Cores].
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
North Bridge Maximum Frequency
It will display North Bridge Maximum Frequency for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
BIOS SETUP UTILITY
Main OC Tweaker Advanced
EZ Overclocking
Load Optimized CPU OC Setting
Load Optimized mGPU OC Setting
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Spread Spectrum
Boot Failure Guard
Boot Failure Guard Count
Advanced Clock Calibration
AMD Turbo Core Technology
AMD IO C-State Support
CPU Active Core Control
Processor Maximum Frequency
North Bridge Maximum Frequency
Processor Maximum Voltage
Multiplier/Voltage Change
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
H/W Monitor Boot Security
Overclocking may cause
[Press Enter]
damage to your CPU and
[Press Enter]
motherboard.
It should be done at
your own risk and
[Auto]
expense.
[200]
[100]
[Auto]
[Enabled]
[3]
Select Screen
[Disabled]
[Auto] Select Item
[Enabled]
Enter Go to Sub Screen
[Disabled]
F1 General Help
F9 Load Defaults
x13.5 2700 MHZ
F10 Save and Exit
x10.0 20 00 MHz
1.325 V ESC Exit
[Manual]
4 1 4 1 4 1 4 1 4 1
Exit