NETGEAR WNR1000v3 - Wireless- N Router User Manual page 99

3. Click Show Statistics to display router usage statistics.
Figure 6-3
Table 6-3 describes the router statistics.
Table 6-3. Router Statistics
Item
System Up Time
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
Poll Interval
To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
Set Interval.
To stop the polling entirely, click Stop.
Using Network Monitoring Tools
Description
The time elapsed since the router was last restarted.
The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the
screen displays the following:
The link status of the port.
The number of packets transmitted on this port since reset.
The number of packets received on this port since reset.
The number of collisions on this port since reset.
The current transmission (outbound) bandwidth used on the WAN and LAN ports
(the average bytes per second transmitted since reset). Tx B/s is the total bytes
transmitted divided by the system up time (in seconds).
The current reception (inbound) bandwidth used on the WAN and LAN ports (the
average bytes per second received since reset). Rx B/s is the total bytes received
divided by the system up time (in seconds).
The time elapsed since this port acquired the link.
The intervals at which the statistics are updated in this screen.
v1.0, February 2010
Wireless-N 150 Router WNR1000v3 User Manual
6-6