Pair & Connect With Bluetooth Devices; Rescan For Bluetooth Devices; Clear Device List - HTC T-Mobile G1 User Manual

Pair & connect with Bluetooth devices
Before your phone can communicate with a Bluetooth headset or hands-free car kit, the devices must
"pair", then "connect":
1 Make sure you have turned Bluetooth on, as described in "Turn on Bluetooth services" on
page 34.
HOME
2 Press , then press
3 Your phone starts scanning for Bluetooth devices within range. As they are found, the devices
appear in the list of Bluetooth devices.
4 To pair with a device in the list, select it.
5 Type the device's PIN, then select
know the PIN.)
6 Once paired, select the device name to connect. You can also touch & hold the name to open the
context menu, then select
7 Pairing and connection status appear under the device name.
8 Once the other Bluetooth device shows "connected" status, you can start using it to make and
receive phone calls.
9 To disconnect or unpair with a device, touch & hold the device to open the context menu. Select
Disconnect Unpair
or
disconnected as well.
Notes:
• The phone supports only the headset and hands-free Bluetooth profiles, so if you try to connect
to a device that is not a headset or hands-free car kit, then you will receive an "unable to
connect" message.
• If you pair with a second headset while connected to the first, the first headset will remain
connected. To switch connection to the second headset you must manually select that headset
again after pairing.

Rescan for Bluetooth devices

If you want to update the list of Bluetooth devices, press

Clear device list

If you want to disconnect, unpair, and remove the devices in the list, press
device list
. Note that devices that were connected to your phone will remain paired and in the list
Clear device list
until you
T-Mobile G1 User Guide R1.0
MENU Settings
and select
OK
. (Read the manufacturer's documentation if you don't
Connect
.
, as appropriate. If you select
again.
35
Wireless controls
> >
Unpair
when connected, you will be
MENU Scan for devices
and select
MENU
Bluetooth settings
.
.
Clear
and select
September 12, 2008