Table of Contents
Advertisement
Setting the Visible Timeout Values
Each time you pair your phone with another Bluetooth-
enabled device, you have a limited amount of time before the
connecting device can "discover" you. Here you set the
amount of time the other device has to connect with you
before your phone times out.
1. From the Home screen, tap
2. Tap the ON/OFF slider, located to the right of Bluetooth
to turn Bluetooth ON
3. Tap a device in the list (a device you connect with),
then press
out value. Selections are: 2 min, 5 min, 1 hour, or Never
timeout.
Each time you connect with this device the time-out
values are the same (until changed).
4. Tap the check box next to SCH-R950 if you do not want
your phone visible to other Bluetooth devices.
Viewing Received Files
You can view the files received from any Bluetooth enabled
device that displays on the Bluetooth screen.
1. From the Home screen, tap
162
Settings.
.
ON
Visible time-out and select a time-
Settings.
2. Tap the ON/OFF slider, located to the right of Bluetooth
to turn Bluetooth ON
3. Touch a listed device, then press
The files received from this device display.
Scanning and Connecting to Devices
Scanning locates and displays the available Bluetooth-
enabled devices so you can pair with them.
1. From the Home screen, tap
2. Tap the ON/OFF slider, located to the right of Bluetooth
to turn Bluetooth ON
3. Tap Bluetooth
Scan. The phone begins scanning and
displays other Bluetooth-enable devices.
Important! Some secured Bluetooth devices require a PIN
number in order to pair with them.
4. Enter the connecting devices required PIN number,
then tap OK.
.
ON
Received files.
Settings.
.
ON
Advertisement
Table of Contents
