Connecting The Speakers - Samsung HT-E6750W User Manual

Connecting The Speakers

1. Match each speaker cable bundle to the correct speaker by matching the
colour coded plug on each bundle to the coloured sticker on the bottom
of each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire,
and then release the tab.
b. Press down the black tab on the back of the speaker, insert the black
wire, and then release the tab.
3. Connect the speaker wire plugs to the back of the product by matching
the colours of the speaker plugs to the colours of the speaker jacks.
4. With the product turned off, insert the TX card into the TX Card
Connection (WIRELESS) on the back of the product.
• Hold the TX card so that the label "WIRELESS" faces upward and
insert the card into the port.
• The TX card enables communication between the product and the
wireless receiver module.
5. Connect the left and right surround speakers to the wireless receiver
module. Again, match the colour of the plugs to the jacks on the
wireless receiver module.
6. Plug the power cord of the wireless receiver module into the wall
outlet.
7. Turn on the product. The product and wireless receiver module will
now communicate with each other and you will hear sound from the
Surround speakers.
Surround
Speaker (L)
Wireless Receiver Module
This product should be connected with the SWA-5000 only.
Centre Speaker
Subwoofer
CENTER
Surround
SUBWOOFER
Speaker (R)
SPEAKER IMPEDANCE : 3
CENTER
SUBWOOFER
Black
LAN WIRELESS
TX card
Front/Front Top
Speaker (L)
SPEAKERS OUT
FRONT FRONT TOP
FRONT FRONT TOP
Front/Front Top
Speaker (R)
SPEAKERS OUT
FRONT FRONT TOP
FRONT FRONT TOP
SPEAKER IMPEDANCE : 3 iPod LAN WIRELESS
English
Red
HDMI OUT
17
|