Samsung HT-E6750W User Manual page 35

K
WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a WPS(PBC)
button, follow these steps:
1 . Open the Home screen.
2 . Press the BLUE (D) button on the remote
control.
3 . Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the product and each other
using a peer-to-peer network, without a wireless
router.
1 . Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2 . In the Home screen, select Settings, and
then press the E button.
3 . Select Network, and then press the E
button.
4 . Select Wi-Fi Direct, and then press the E
button.
The Wi-Fi Direct devices that you can
connect appear.
Wi-Fi Direct
Device Name : [HTS]E6750W
Display
Select your Wi-Fi Direct device to connect to.
Audio
AndroidXXXXXXX Disconnected
Network
System
Support
m Move
5 . You have three ways to complete the Wi-Fi
Through the Wi-Fi Device
1 . On the Wi-Fi device, follow the procedure on
2 . When you have completed the procedure,
3 . The Connecting pop-up appears, followed
Through the Product Using PBC
1 . Select the Wi-Fi Direct device you want to
2 . Select PBC, and then press the E button.
3 . Press the PBC button on the Wi-Fi Direct
4 . The Connecting pop-up appears, followed
Through the Product Using a PIN
1 . Select the Wi-Fi Direct device you want to
Refresh
Close
2 . Select PIN, and then press the E button.
" Enter ' Return
3 . Note the PIN code in the pop-up, and then
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
Each is covered below.
the device for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
and then press the E button to accept.
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
connect to this product, and then press the
E button. The PBC/PIN pop up appears.
The PBC pop-up appears.
device within 2 minutes.
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
connect to this product, and then press the
E button. The PBC/PIN pop up appears.
The PIN pop-up appears.
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
35
|
English