Echo SB Safety Manual page 49

Cotter Pin
Cultivator Attachment
Cut-Off Knife
Cutting Head
Danger Zone
Debris Shield
Edger
Face Mask
Face Shield
Foot Protection
Front Handle
Fuel Filter
Fuel Tank
Gear Case
Goggles, Safety
Grass Trimmer
Grass/Weed Blade
GT
Harness
A fastening device used to retain hex nuts on threaded shafts.
Also called a split pin.
A rotating work attachment used on Power Attachment Series
units. Rotating tines cultivate and break up soil for weeding,
planting seeds, and working mulch into the soil.
A cutting device attached to a plastic debris shield that cuts
nylon trimming line to the correct length.
A device that is designed to cut material by means of a nylon
line head, metal or nylon blades, or rotating saw chain.
An area around the operator where there is a high risk of injury
from contact with flying debris or sharp cutting head/work
attachments.
A plastic or metal barrier that helps protect an operator from
being struck by debris when using outdoor power equipment.
A device with rotating blade that cuts a clean, straight edge.
Normally used along the edge of hard surfaces, such as be-
tween the lawn and a sidewalk.
Protective device worn over mouth and nose. Protects against
breathing sawdust or other small particles.
Protective device worn over safety glasses or safety goggles
to provide face protection from flying debris.
Heavy-duty footwear that helps protect feet from injury.
Provides secure support of unit for proper balance and control.
Helps reduce operator fatigue.
Filter element located on end of fuel line. Filters fuel mix
before it enters carburetor.
Contains fuel mix used for engine operation.
Provides rotating or reciprocating motion to a cutting head or
work attachment.
Protective eyewear that fits over glasses and provides com-
plete, wrap-around protectionl
A unit designed to cut only grass and light weeds.
A blade used to cut soft, light vegetation, such as grass and
weeds. Not for use in clearing brush, saplings, or small trees.
Grass Trimmer (Curved Shaft). GT models cannot use a metal
blade.
An adjustable shoulder strap used to support a trimmer or
brushcutter. Helps operator control unit by providing a stable
support and reducing fatigue. Required for all Brushcutter
applications.
GLOSSARY
49