Samsung ML-1440 Service Manual page 78

To remove the heat roller from the fuser assembly :
1. Remove the halogen lamp. (see page 3-11)
2. Remove two CS-rings and two gears. Then remove
two screws securing the BRKT gear fuser and take the
gear fuser out.
3. Remove two screws and take the cover fuser out.
4. Remove two screws and take the holder brush
ant out.
Samsung Electronics
CS-ring
BRKT gear fuser
Holder brush ant
4. Remove the heat roller.
To remove the pressure roller from the fuser
assembly :
Remove the roller.
Disassembly and Reassembly
pressure roller
3-11