Adjusting The Print Density - Brother HL1060 - B/W Laser Printer Service Manual

USER'S GUIDE

ADJUSTING THE PRINT DENSITY

CHAPTER 5 –10
The print density dial is located inside the printer. You can use it to adjust
the amount of toner applied to the paper.
When the toner cartridge and drum unit are replaced, or if the operating
temperature and humidity are high or low, print conditions may change
causing darker or lighter printouts.
Use a screwdriver to turn the print density dial gently clockwise for darker
printouts and counterclockwise for lighter printouts. The dial has been
factory set to the middle position.
Lighter Darker
Fig. 5-17 Adjusting the Print Density Dial
Warning
After you have just used the printer, some internal parts of the printer
are extremely hot. When you open the top cover of the printer, never
touch the shaded parts shown in the following illustration.
High Temperature
Fig. 5-18 Inside the Printer