Battery Charge - Nextar MA715 - 1 GB Digital Player Instruction Manual

4.3

Battery charge

This product adopts build-in rechargeable Li battery.
You can connect the mp3 player to PC or use USB adapter to charge the battery.
This icon will be displayed at the upper left corner of the screen. The following pictures indicate the charging status of the
battery:
(1)
When the battery is charging, the icon will be changing from an empty battery to a full one to indicate the
process.
(2)
The following icon will replace the charging one when the battery is full but the power supply is not being cut off.
(3)
The player will be automatically shut off when the power is used up. In this case, all setting will be saved.
(4)
Power saving mode: User can define the power off mode, such as idle off, sleep off, screen off to save
power. Please refer to the setting instruction in function section for details.
Note: The mp3 player only accepts the standard USB 2.0 output voltage and current to charge the built-in Li-Ion battery: 5-Volt voltage and less than
500mA current. If the charging voltage and current are out of the compass, it will damage the battery and the mp3 player. It will be no warranty in this
case. Please make sure the output voltage and current of the USB port on your PC or USB adapter before charging this player. If you found the screen
is blinking during using the USB wall adapter, please use the PC USB port to charge the player instead of USB wall adapter.
10