Optical Drive - HP 4310s - ProBook - Core 2 Duo 2.1 GHz Maintenance And Service Manual

Removal and replacement procedures

Optical drive

✎
The optical drive spare part kit includes an optical drive bezel and bracket.
Description
Blu-ray ROM DVD±R/RW SuperMulti Double-Layer Drive with LightScribe
DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
DVD-ROM Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the optical drive:
1. Remove the slotted Phillips PM2.5×8.0 screw 1 that secures the optical drive to the computer.
2. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access 2, and then press the tab to the
left to release the optical drive from the computer.
3. Remove the optical drive 3 from the optical drive bay.
4–18
"Battery" on page 4-7).
Spare part number
577202-001
577204-001
577203-001
Maintenance and Service Guide