Palm Rest - HP 4310s - ProBook - Core 2 Duo 2.1 GHz Maintenance And Service Manual

Palm rest

✎
The palm rest is included with the top cover. See
information.
Before removing the palm rest, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard and switch cover (see
Remove the palm rest:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
3. Remove the slotted Torx T8M2.5×7.0 screw that secures the palm rest to the computer.
Maintenance and Service Guide
"Top cover" on page 4-36
"Battery" on page 4-7).
"Keyboard and switch cover" on page
Removal and replacement procedures
for top cover spare part and removal
4-20).
4–25